HP 98568A Installation Instruction page 179

HP 98644A Asynchronous Serial Interface
Verification Test
1. Plug in the power cord and turn your computer on. If you have systems
on-line that the computer can boot, press the space bar a few times to
suspend the automatic booting process.
2. Check the list of components displayed on the left-hand side of the screen:
• If you have boot ROM 4.0 or later, the message,
HP98644,
should
appear in the list. If it does, you have correctly installed the HP 98644A
Asynchronous Serial Interface. If no message appears, repeat the
installation procedure, making sure there are no select code conflicts and
that the card is firmly seated in an even-numbered slot. If the message
still does not appear, call your HP Service Representative for assistance .
• If you have boot ROM 3.0, no message will appear, as boot ROM 3.0
does not identify the HP 98644A Asynchronous Serial Interface. Assume
installation is correct.
Adding Interface Cards 5-83