HP 98568A Installation Instruction page 383

SKIP?
HP 2932A and 2934A Printers
If this is the first (or only) printer you are connecting to the
interface, you can skip to step 6. The address is preset to 1 and
need not be changed-unless you have changed the address of
some other device on the interface to 1.
a. Turn the printer on. The power switch is in the back above the power
cord.
b. Press the SELECT button on the top of the printer, then press the
VIEW button. The printer will respond by printing its SETTINGS
options.
c. Press the right arrow button until the print head is under the MODIFY
INTERFACE option (i.e., under the word "INTERFACE" on the right
side of the paper.
d. Press the SELECT button. The printer will print the MODIFY
INTERFACE - HP-IB options.
e. Press the right arrow button until the print head is under the ADDRESS
option, then press the SELECT button.
f. The printer will print a list of numbers. Press the right arrow button
until the print head is under the number 4 and press the SELECT
button, unless you have used address 4 elsewhere. If you have, choose
any unused address.
Note
If the printer asks you to select a FIRST DIGIT and a
SECOND DIGIT, position the print head under 0 for the
FIRST DIGIT and press the SELECT button, then position
the print head under 4 for the SECOND DIGIT and press the
SELECT button.
g. Press the VIEW button to exit SETTINGS mode.
Adding Printers 7 -35