HP 98568A Installation Instruction page 258

HP 7933/7935 Disk Drives
~:
~SJ
Address 2
Figure 6-9.
Address 2
• If there are two other disk or tape drives (besides this HP 7933/35)
already connected to the interface, set the "HP-IB PRIMARY PORT"
switches on your HP 7933/35 to 3 as shown in Figure 6-10, unless
address 3 has been used elsewhere.
Address 3
Figure 6-10.
Address 3
4. Connect the Disk to Your Computer.
a. Find the HP-IB cable provided with the disk drive.
b. Connect one end of the HP-IB cable to the HP-IB socket on the back of
the disk drive. Tighten the thumb screws to secure the connection.
c. Connect the other end of the HP-IB cable to the interface.
6-32 Adding Mass Storage Devices