Installing Ram Boards In A Model 320 Computer - HP 98568A Installation Instruction

Installing RAM Boards in a Model 320 Computer
This procedure describes how to install RAM cards in Series 300 Model 320
conlputers. If you have a Series 300 Model 330 or 350 computer, refer to the
following sections.
In this procedure, you will set the switches on each of your RAM cards to a
unique setting. No two RAM cards may have their switches set the same way.
1. Follow the directions on the Series 300 Memory Configuration Wheel to set
the switches on your RAM cards.
HELP?
Refer to the following section, "Help with the Memory
Configuration Wheels."
2. Once you have completed all instructions on the Memory Configuration
Wheel, turn the computer on and check the number of bytes displayed on
the screen. This number should be approximately equal to the total number
of bytes of RAM you have installed in your computer. Count:
• 1 048 000 bytes for each 1 Mbyte card you installed
• 256 000 bytes for each 256 Kbyte card you installed
• G4 000 bytes for each 64 Kbyte card you installed
3-4 Adding RAM