HP 98568A Installation Instruction page 87

HP 98556A
20 Graphics Accelerator
Description and Support
The HP 98556A 2D Graphics Accelerator is an add-on option for the HP
98549A and HP 98550A Color Video Boards. It resides piggy back on the
video board. The board pair fits into one slot in the Series 300 computer or
Direct-Connect I/O Expander.
Note
If you have an HP 98264A/B ECC RAM card or an HP
98248A Floating-Point Accelerator card mounted in your
computer, the HP 98556A 2D Graphics Accelerator card
must
be mounted in the Direct-Connect I/O Expander.
HP 98556A 20 Graphics Accelerator
Series 300 HP-UX Operating System Support
on Release with Model
6.0 or later 319C+
330
340
350
360
370
Installation Procedure
1. Play It Safe.
a. Turn your computer off and unplug the power cord.
b. Remove the Graphics Accelerator from its envelope, being careful to
handle the card only by its non-connector edges. The card may be easily
damaged by electrostatic discharge (static zap).
c. Place the card on its envelope, or use a static-free workstation, HP part
number 9300-0933 ..
Adding Accessory Cards 4-11