Installation Procedure - HP 98568A Installation Instruction

HP 98568A Backplane Expander
Installation Procedure
1. Turn the computer power off and unplug the power cord from the rear
panel.
2. Loosen the two captive screws securing the power supply access door
on the computer and remove the access door. You may need a Pozidriv
screwdriver to loosen the captive screws.
Figure 2-1.
Access Door Screws
3. Slide the computer top cover toward the rear of the computer. Then spring
the sides out and up and lift it off.
Adding Expanders 2-3