HP 98568A Installation Instruction page 65

Installing RAM in a Model 350
~I ''i.1
tt;=
II
=========;11~1
L
II
) PIN r;ght
J
extractor
location extractor
Figure 3-5.
Part Number Location
Identify the board size with this chart:
Table 3-5.
RAM Board Identification
Extractor Colors
Left-Right Part Number Memory Size
Grey-Green none (Single board) 4 Mbytes
98258-66521 8 Mbytes
98258-66522 16 Mbytes
Blue-Yellow 98264-66521 8 Mbytes
98264-66522 16 Mbytes
Put each board back into the computer when you have determined its size.
You may wish to label the boards with their size, as you will need this
information later.
When you have determined the sizes of all the RAM boards in the computer,
you are ready to assign the address to the boards. If your system contains
approximately 16 Mbytes in any combination, go directly to the section titled,
"Installing the RAM Board". Otherwise, continue with the next section.
Adding RAM 3-17