HP 98568A Installation Instruction page 376

HP
2686A/D
Laser J et
HP 33440A LaserJet-II
HP 33447A LaserJet-IID Printer
3. Select Your Cable {s}.
Following are some of the possible cabling combinations you can use.
Combinations other than those listed may also work.
• Series 300 Built-in Interface: connect an HP 17255D to the printer if an
HP 92221M or 13242N cable is connected to the interface; or connect an
HP 92221P cable directly between the printer and the interface (HP-UX
only).
• HP 98626A or HP 98628A Interfaces: connect an HP 17255D cable to the
printer if an HP 5061-4215 DTE cable is connected to the interface; or
connect an HP 13242N or 92218A cable to the printer if an HP 5061-4216
DCE, 13232U or Modem
~Modem
cable is connected to the interface.
• HP 98642A Interface: connect an HP 17255D cable to the printer if an
HP 922198, 92218A, or 92222M cable is connected to the interface (port
0); or connect an HP 13242G or 92219R cable directly between the printer
and the interface (port 0); or connect an HP 92219U adaptor directly from
the interface (ports 1, 2 or 3) and the printer.
• HP 98644A Interface: connect an HP 17255D cable to the printer if an
HP 13242N, 92218A or 92222M cable is connected to the interface; or
connect an HP 13242G or 92219R cable directly between the printer and
the interface.
4.
Connect the Printer to the Computer.
a. Connect one (male) end of the printer's cable to the connector on the
printer. Lock the connection in place with the screws.
b. If your interface connection requires one or more additional cables,
connect the remaining cable( s) to the interface.
c. Connect the other end of the printer's cable either directly to the
interface or to cable( s) connected to the interface.
5. Connect the Power Cord.
a. Connect the female end of the power cord to the power socket on the
back of the printer, and connect the other end to your power outlet.
7 -28 Adding Printers