HP 98568A Installation Instruction page 501

HP 92205A/C Hayes Smartmodem 1200
Worksheet Entries
You have now installed your modem.
The following "Worksheet Entries" contain information needed to use your
modem with the HP-UX operating system.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Table 10-16.
If You Connected the Modem to
a Series 300 Built-in Interface (Select Code 9) ...
Path* File Major Minor
Device Name Name
Type Number
Number
Smartmodem
/dev/tty02
c
1 Ox090000
Smartmodem /dev/cua02 c
1 Ox090001
Smartmodem
/dev/culO2
c
1 Ox090001
* The path names given in the Worksheet Entries assume this is the second
terminal or modem you are connecting (i.e., tty02). If this is not the case,
change the path names accordingly (e.g., /dev/tty03 for the third modem, etc.).
Adding Miscellaneous Peripherals 10-59