Worksheet Entries - HP 98568A Installation Instruction

Hp 9000 series 300 computers
Hide thumbs Also See for 98568A:
Table of Contents

Advertisement

HP 45911 A Graphics Tablet
Worksheet Entries
You have now installed your HP 45911A Graphics Tablet.
The following "Worksheet Entries" contain information needed to use your
tablet with the HP-UX operating system.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP- UX operating system.
Note
HP-HIL devices can be added to or removed from the HP-HIL
interface without affecting the HP-UX operating system.
However, if your application requires the use of a particular
device and you remove the device from the link, open the
link to the device, or open the link to add a new device, your
application might not recognize the change and may not work
as expected.
Table 10-4.
45911 A Graphics Tablet
Worksheet Entries
Path
File
Major
Minor
*
Power
Device Name
Name
Type
Number
Number
Req.
HP 4591lA
/dev/r8042
e
23
OxOOOOOO
133 rnA
HP 4591lA
/dev/digitizer
e
24
OxOOOO20
133 rnA
*
The second minor number in the table assumes the graphics tablet is the second
device on the HP-HIL interface (address=2). If this is not the case, substitute
the correct position (address) of the tablet in place of the 2 in the minor number
(e.g., if the tablet is the third device on the interface, the minor number would
be OxOOOO30).
10-18
Adding Miscellaneous Peripherals

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents