HP 98568A Installation Instruction page 358

HP 2227AjB QuietJet Plus
and 2228A QuietJet Printers
b. Refer to the manual that came with the printer to set the address to one
that is currently unused.
c. Record the address on the "Address Record" form on the Chapter 6,
"Mass Storage" tab.
4. Connect Printer to Computer
a. If you have an HP 2227 A or 2228A printer (RS-232C interface):
1.
Select your cable(s). Following are some of the possible cabling
combinations you an use. Combinations other than those listed may
also work.
• Series 300 Built-in Interface: connect an HP 40242G to the printer
if an HP 98561-61604 cable is connected to the interface; or connect
an HP 40242G cable directly between the printer and the interface.
• HP 98626A Interface: connect an HP 17255D cable to the printer
if an HP 5061-4215 DTE cable is connected to the interface; or
connect an HP 40242M cable to the printer if an HP 5061-4216
DCE cable is connected to the interface.
• HP 98628A Interface: connect an HP 17255D cable to the printer
if an HP 5061-4215 DTE cable is connected to the interface; or
connect an HP 40242M cable to the printer if an HP 5061-4216
DCE cable is connected to the interface.
II
liP 98644A
Interface: connect an HP 40242G cable directly
between the printer and the interface.
11.
Connect one (male) end of the printer's cable to the connector on the
printer. Lock the connection in place with the screws.
lll.
If your interface connection connection requires one or more
additional cables, connect the remaining cable( s) to the interface.
b. If you have an HP 2227B printer HP-IB (interface):
1.
Get an HP-IB cable.
ll.
Connect one end of the HP-IB cable to the HP-IB connector on
the back of the printer. Tighten the thumb screws to secure the
connection.
7 -10 Adding Printers