Worksheet Entries - HP 98568A Installation Instruction

HP Series 6100 Model 600/A
CD-ROM Drive
Worksheet Entries
You have now installed your Model
600/
A CD-ROM Drive.
The following "Worksheet Entries" contain information needed to use your
CD-ROM Drive with the HP-UX operating system. Refer to the entries for the
interface you will be using.
Table 6-1.
Model 600/ A CD-ROM Drive
Connected to HP 98625 Disk Interface (Select Code 14)
Path*
File Major
Minor **
Interleave
Device Name Name Type Number
Number Factor
Mode1600/A
/dev/dsk/#sO
b 0 OxOeOnOO 0
Mode1600/A
/dev/rdsk/#sO
c 4 OxOeOnOO 0
*
**
#
is a number that identifies the CD-ROM drive (for example, 0 for the
root disk, 1 for the next disk installed. Replace # with any unique number,
and use the same number in both the / dey / dsk and / dey / rdsk entries (for
example, /dev /dsk/lsO and /dev /rdsk/lsO).
n is a number that identifies the address (set in step 4 of this installation
procedure). Replace n with a 2 if the address was set to 2, use 3 if the
address set to 3, and so on.
6-6 Adding Mass Storage Devices