Worksheet Entries - HP 98568A Installation Instruction

HP 46060A/B Mouse
Worksheet Entries
You have now installed your HP 46060A/B Mouse.
The following "Worksheet Entries" contain information needed to use your
mouse with the HP-UX operating system.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Note
HP-HIL devices can be added to or removed from the HP-HIL
interface without affecting the HP-UX operating system.
However, if your application requires the use of a particular
device and you remove the device from the link, open the
link to the device, or open the link to add a new device, your
application might not recognize the change and may not work
as expected.
Table 10-6.
HP 46060A/B Mouse
Worksheet Entries
Path File rvlajor Minor
*
Power
Device Name Name Type Number Number Req.
HP 46060A/B
/dev/r8042 c 23 OxOOOOOO 133 rnA
HP 46060A/B
/dev/mouse
c 24 OxOOOO20 133 rnA
*
The second minor number in the table assumes the mouse is the second device
on the HP-HIL interface (address=2). If this is not the case, substitute the
correct position (address) of the mouse in place of the 2 in the minor number
(e.g., if the mouse is the third device on the interface, the minor number would
be OxOOOO30).
10-24 Adding Miscellaneous Peripherals