Worksheet Entries - HP 98568A Installation Instruction

HP Series 6300 Model 650/ A
Optical Disk Drive
Worksheet Entries
Now you have installed your optical disk drive.
You are ready to access the driver using HP-UX.
The following "Worksheet Entries" contain information needed to use your
optical disk drive with the HP-UX operating system. Refer to the entries for
the device file type you will be using.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you will be ready to install your next peripheral. If you
have installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Table 6-4.
Model 650/ A Optical Disk Drive
Connected to HP 98265A Disk Interface (Select Code 14)
Path File Major Minor
Device Name Name
Type Number Number *
Model 650jA /dev/dsk/mo b
7
OxOeOnOO
Model 650jA /dev/rdsk/mo c
47
OxOeOnOO
*
n
is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace
n
with a 0 if the address was set to 0, use 2 if the
address was set to 2, and so on.
Adding Mass Storage Devices 6-13