Telnet Interface; Figure 4-1. Telnet Interface Example - Windows Command-Line - Comtech EF Data LPOD Series Installation And Operation Manual

4.3

Telnet Interface

Chapter 5. SERIAL INTERFACE OPERATION
The LPOD has a Telnet interface for the purpose of equipment M&C via the optional Serial
Remote Control protocol. The Telnet interface requires user login at the Administrator level and
Read/Write level. Once logged into the Telnet interface as the Administrator, you have access to
the optional serial-based Remote Control Interface. An example of the login process and remote
control operation is shown in Figure 4-1.
Figure 4-1. Telnet Interface Example – Windows Command-line
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
4–6
Revision 15
MN-LPOD