Telnet Interface - Comtech EF Data HPOD Installation And Operation Manual

HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier
Ethernet-based Remote Product Management
The HPOD uses these Faults v1 traps and v2 notifications:
Faults SNMPv1 traps:
hpod24VPowerSupplyStatusV1
hpod15VPowerSupplyStatusV1
hpod10V1PowerSupplyStatusV1
hpod10V2PowerSupplyStatusV1
hpod7V5TPowerSupplyStatusV1
hpod5VPowerSupplyStatusV1
hpodN5VPowerSupplyStatusV1
hpodFan1StatusV1
hpodFan2StatusV1
hpodTemperatureStatusV1
hpodShutdownStatusV1
hpodIICStatusV1
hpodFwdPwrStatusV1
hpodBUCStatusV1
hpodRefStatusV1
hpodSummaryFaultV1
4.4

Telnet Interface

The HPOD has a Telnet interface for the equipment M&C operations. Log in to the Telnet
interface at the Administrator level or Read/Write level. An example of the login process is
shown here:
After you log into the Telnet interface as the Administrator, you can use the standard remote
control interface, defined in Chapter 5. SERIAL‐BASED REMOTE PRODUCT MANAGEMENT, as
shown here:
Faults SNMPv2 notifications:
62476201 hpod24VPowerSupplyStatus
62476202 hpod15VPowerSupplyStatus
62476203 hpod10V1PowerSupplyStatus
62476204 hpod10V2PowerSupplyStatus
62476205 hpod7V5TPowerSupplyStatus
62476206 hpod5VPowerSupplyStatus
62476207 hpodN5VPowerSupplyStatus
62476208 hpodFan1Status
62476209 hpodFan2Status
62476210 hpodTemperatureStatus
62476211 hpodShutdownStatus
62476212 hpodIICStatus
62476213 hpodFwdPwrStatus
62476214 hpodBUCStatus
62476215 hpodRefStatus
62476216 hpodSummaryFault
4–4
Revision 6
MN/HPOD.IOM
1.3.6.1.4.1.6247.62.1.3.1.1
1.3.6.1.4.1.6247.62.1.3.1.2
1.3.6.1.4.1.6247.62.1.3.1.3
1.3.6.1.4.1.6247.62.1.3.1.4
1.3.6.1.4.1.6247.62.1.3.1.5
1.3.6.1.4.1.6247.62.1.3.1.6
1.3.6.1.4.1.6247.62.1.3.1.7
1.3.6.1.4.1.6247.62.1.3.1.8
1.3.6.1.4.1.6247.62.1.3.1.9
1.3.6.1.4.1.6247.62.1.3.1.10
1.3.6.1.4.1.6247.62.1.3.1.11
1.3.6.1.4.1.6247.62.1.3.1.12
1.3.6.1.4.1.6247.62.1.3.1.13
1.3.6.1.4.1.6247.62.1.3.1.14
1.3.6.1.4.1.6247.62.1.3.1.15
1.3.6.1.4.1.6247.62.1.3.1.16