Snmp Interface; Mib Files; Cefd Root Mib File; Lpod Mib File - Comtech EF Data LPOD Series Installation And Operation Manual

4.2

SNMP Interface

SNMP is an Internet-standard protocol for managing devices over IP networks. An SNMP-managed
network has three key components:
•
The managed device. This includes the LPOD.
•
The SNMP Agent. This software runs on the LPOD. The LPOD SNMP Agent supports
both SNMPv1 and SNMPv2c.
•
The user-supplied NMS. This software runs on the User PC.

4.2.1 MIB Files

MIB files are used for SNMP remote management of a unique device, and consist of a tree of
nodes called Object Identifiers (OIDs). Each OID provides remote management of a particular
function. These MIB files should be compiled in a user-supplied MIB Browser or SNMP Network
Monitoring System server.
In these LPOD MIB file names, the letter x represents the revision of the file.
4.2.1.1

CEFD Root MIB File

•
FW-0000291x.mib
•
CEFD MIB file gives the root tree for all CEFD LPOD products (PSx) and consists of only
the following OID:
o
o
o
o
4.2.1.2

LPOD MIB File

•
FW-0000289x.mib
•
MIB file consists of all of the OID's for management of the LPOD functions
4.2.1.3

LPOD Traps MIB File

•
FW-0000290x.mib
•
Trap MIB file provides SNMPv1 traps common for LPOD.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Name: comtechEFData
Type: MODULE-IDENTITY
OID: 1.3.6.1.4.1.6247
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData
4–2
Revision 15
MN-LPOD