Comtech EF Data LPOD Series Installation And Operation Manual page 100

System Account Access Information
Name fields can be any alphanumeric combination with a maximum length of
10 characters.
Password fields can be any alphanumeric combination with a maximum
length of 10 characters.
Name
Read Only Name
Read Only Password
Read/Write Name
Read/Write Password
Admin Name
Admin Password
SMTP Server
SMTP Domain Name
SMTP Domain Destination
Click [Submit Access] to save any changes.
Click [Reset] to restore the fields to the default setting.
Webpage Timeout
The Webpage Timeout sets the time period that can pass before the HTTP Interface pages time
out.
Use the drop-down list to select 5 minutes (default) or 8 hours.
Click [Submit].
The Status | Status page automatically refreshes once every ten seconds, and
resets the webpage timeout counter.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
The factory default is monitor.
The factory default is 1234.
The factory default is opcenter.
The factory default is 1234.
The factory default is comtech.
The factory default is comtech.
Enter the mail server IP address from where you want to send the e-mail.
The Administrator can assign the SMTP Domain Name. This is required if you
wish to use the e-mail feature of the 'Home | Support' Page (Sect. 4.5.1.3).
Enter the domain of the e-mail server (usually found to the right of the @
symbol in an e-mail address).
The Administrator can assign the SMTP Domain Destination. This is required if
you wish to use the e-mail feature of the 'Home | Support' Page (Sect.
4.5.1.3).
Enter the e-mail recipient name (usually found to the left of the @ symbol in an
e-mail address).
4–18
Description
Revision 15
MN-LPOD