Table of Contents
Advertisement
4.5.4.5
Status | Statistics
This page shows all unread, stored statistics. Use it to configure how the LPOD handles and
shows statistics.
Statistics
Click [Refresh] to see the latest page data.
Unread Stored Statistics: ###
This window shows the unread stored statistics log in sequential, date-stamped format. This page
shows a running tally of the number of unread stored statistics in the window header. The unit
shows the five oldest stored statistics. All events that are read from the log are removed from the
log automatically.
•
Select Read Next Five Statistics to cause the unit to return the oldest five unread stored
statistics that remain unread in the log. If fewer than five events are available for retrieval,
the remaining positions are padded with zeros. If there are no new events, the counter in
the header reads 000.
•
Select Initialize Statistics Pointer to reset the internal pointer to allow queries to start at
the beginning of the statistics log.
Click Submit to update the window according to your selection.
Statistics Configuration
•
Statistics Interval – Enter the interval at which statistics are logged. The interval is set in
minutes. Minimum resolution is 1 minute (001); maximum is 99 minutes (099). Default is
90 minutes (090).
•
Statistics Averaging – Select Enable or Disable to set the Statistics Averaging
function:
o
o
Click [Submit] to save the changes.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Figure 4-19. 'Status | Statistics' Page
If Enabled, statistics data is averaged at a rate of once per second for 10
seconds.
If Disabled, burst values are logged instead of averaged values.
4–31
Revision 15
MN-LPOD
Advertisement
Table of Contents
