Appendix B. Cable Drawings; Overview - Comtech EF Data LPOD Series Installation And Operation Manual

B.1

Overview

This appendix provides line details for the cables available for use with the LPOD in Standalone or 1:1 Redundancy applications. Each
figure illustrates the cable's technical specifications – e.g., connector types used, cable labeling, wiring lists, etc.
The tables in this appendix cross-reference cable use in LPOD Standalone applications as well as the various 1:1
Redundancy application examples provided in Appendix A. 1:1 REDUNDANCY.
The European EMC Directive (EN55022, EN50082-1) requires that you use properly shielded cables for DATA I/O. These
cables must be double-shielded from end-to-end, ensuring a continuous ground shield.
Appendix B

Appendix B. CABLE DRAWINGS

B-1
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
MN-LPOD