Ethernet Interface Cable - Comtech EF Data LPOD Series Installation And Operation Manual

Outdoor amplifier / block up converter (buc)
Table of Contents

Advertisement

B.2.2 Ethernet Interface Cable
The CEFD Ethernet Utility Kit (CEFD P/N KT-0000203) includes the CA-0000352 Ethernet Interface Cable. This kit is optionally available to
provide Ethernet-based M&C of 1:1 Redundancy or Standalone LPOD applications using a Samsung NB30 Plus Netbook (LPODnet). The
'P1' circular connector installs onto the Redundant Loop Cable 'J1' connector in 1:1 LPOD Redundant applications, or the 'J6 | COM 1'
connector on a Standalone LPOD. Use the 'J2' and 'J3' RJ-45 connectors to either connect directly to the LPODnet's Ethernet network jack
(for Standalone use) or via a user-provided Ethernet switch or hub (for 1:1 Redundancy use).
Appendix B
Figure B-2. Ethernet Interface Cable (CEFD P/N CA-0000352, part of KT-0000203)
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
B-4
Revision 15
MN-LPOD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpod ps 1Lpod ps 1.5Lpod ps 2

Table of Contents