Table of Contents
Advertisement
2.2.2 Cable Wrapping
Wrap all connections with self-amalgamating tape, as follows:
1. Wrap tape in the direction of the cable connection.
2. Pull the tape tight and use several layers. Make sure to start at the end of the connector
connection.
3. Verify the tape covers all of the connector and makes contact with the unit.
System Connectors, Installation, and Startup
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
2–3
Revision 15
MN-LPOD
Advertisement
Table of Contents
Need help?
Do you have a question about the LPOD Series and is the answer not in the manual?
Questions and answers