Admin | Snmp - Comtech EF Data LPOD Series Installation And Operation Manual

4.5.2.2

Admin | SNMP

SNMP
Click [Refresh] to see the latest page data.
The Community String fields can be any combination of characters and a
length of 0 to 20 charaters.
Name
Simple Network Management
Read Community String
Write Community String
SNMP Contact
SNMP Name
SNMP Location
Enable Authentication Trap
Trap IP 1
Trap IP 2
Trap Version
Trap Community String
Click [Reset] to restore the previously saved settings.
Click [Submit SNMP] to save any changes.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Figure 4-10. 'Admin | SNMP' Page
Use the drop-down list to select Enabled or Disabled.
The factory default is public.
The factory default is private.
Enter the contact data.
Enter the name.
Enter the location.
Use the drop-down list to select Enabled or Disabled.
Assigned by the Administrator.
Assigned by the Administrator.
Use the drop-down list to select the version.
The factory default is Comtech.
4–19
Description
Revision 15
MN-LPOD