Telnet Interface - Comtech EF Data TRP1000-OD Installation And Operation Manual

4.4

Telnet Interface

The TRP1000-4450 provides a Telnet interface for the purpose of equipment M&C via the standard
Remote Control protocol. The Telnet interface requires user login at the Administrator level and
Read/Write level. An example of the login process is shown here:
Once logged into the Telnet interface as the Administrator, you can access the standard remote
control interface, defined in Chapter 5. SERIAL-BASED REMOTE PRODUCT MANAGEMENT, by
typing in a pertinent remote command or query at the Telnet -- > prompt.
4.5 Web Server (HTTP) Interface
A user-supplied web browser allows the full M&C of the TRP1000-4450 from its Web Server
Interface. This embedded web application is designed for, and works best with, Microsoft's Internet
Explorer Version 5.5 or higher.
Refer to the Remote Commands and Queries specifications tables found in Chapter 5. SERIAL-
BASED REMOTE PRODUCT MANAGEMENT for detailed descriptions of the configuration
parameters featured on the individual web pages shown in this chapter.
4.5.1 User Login
From the PC, type http://192.168.1.4 (the default IP address for the TRP1000-4450) into the
Address area of the browser:
Ethernet-based Remote Product Management
TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
4–6
Revision 0
MN-TRP1000-OD