Cable Sealing And Wrapping - Comtech EF Data LPOD Series Installation And Operation Manual

C.5

Cable Sealing and Wrapping

Before you resume operation of your equipment, you MUST make sure that all
external cable assemblies for the outdoor equipment are properly sealed and
wrapped to prevent water intrusion. Failure to achieve water tight sealing and
wrapping will result in possible performance degradation and even product
failure.
Chapter 2. SYSTEM CONNECTORS, INSTALLATION, AND STARTUP, Section 2.2
Cable Sealing and Wrapping To maintain your product warranty, you must follow
the guidelines and recommendations provided in this section.
Appendix C
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
C–14
Revision 15
MN-LPOD