Ps 2 'J3 | Power In' 48 Vdc Power Main Option; Table 2-7. Ps 2 'J3 | Power In' 48 Vdc Pin Assignments - Comtech EF Data LPOD Series Installation And Operation Manual

2.3.4.4

PS 2 'J3 | POWER IN' 48 VDC Power Main Option

The connector type and mating connector specification and the pin assignments specific to the
PS 2 48 VDC power interface option are as follows:
Unit Connector Type:
CEFD P/N CN-0000288 (ITT Cannon CA3102E20-15SB-F80A232)
Supplied Mating Connector:
CEFD P/N CN-0000289 (ITT Cannon CA3106E20-15SB-F80A232)
Pin
A
B
C
D
E
F
G
Notes:
1. Use 12 AWG wire to each of the appropriate pins, according to the individual pin assignments.
2. As an alternative, the ground connection can be made to the unit's external ground stud.
System Connectors, Installation, and Startup
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)

Table 2-7. PS 2 'J3 | POWER IN' 48 VDC Pin Assignments

V+
V+
NO CONNECT
NO CONNECT
V-
V-
GROUND (Note 2)
Description
2–10
Revision 15
MN-LPOD