Comtech EF Data LPOD Series Installation And Operation Manual page 116

The graphs are all tied to the same 'x' scale so that you can more easily correlate data between
the graphs.
Temperature Graph
As per the legend:
•
The blue line graphs the unit's Amplifier (heat sink) temperature
•
When you install the available sensor in the unit, the red line graphs the Ambient
(outdoor) temperature.
Check or uncheck a checkbox to control the graphing of either temperature. The graph will
update dynamically after the next polling cycle (every five seconds).
Power Graph
This graph displays the unit's output power with 1dB resolution. You may set this information to
display as dBm (the default setting) or watts. The graph will update dynamically after the next
polling cycle (every five seconds).
When you click the [Refresh] tab, the graph reverts to the default display (Unit in
dBm).
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
4–34
Revision 15
MN-LPOD