Comtech EF Data LPOD Series Installation And Operation Manual page 92

4. Use the LRS=2 remote command to set the remote access parameter for Ethernet
remote control.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
The LRS remote command sets or returns Local or Remote state in the
form x, where x=0, 1, 2, or 3:
•
LRS=0 (Local)
•
LRS=1 (Serial)
•
LRS=2 (Ethernet)
•
LRS=3 (Serial+Ethernet) (default value)
4–10
Revision 15
MN-LPOD