Safety Symbols - Edwards EXS Series Instruction Manual

1.3 Safety symbols

The safety symbols on the products show the areas where care and attention is
necessary.
The safety symbols that follow are used on the product or in the product
documentation.
45
A41870880_A
A41870880_A - Safety and compliance
Warning/Caution
An appropriate safety instruction must be followed or caution to a po-
tential hazard exists.
Warning - Automatic start up
The equipment can be remotely started.
Warning - Dangerous voltage
Identifies possible hazards from dangerous voltages.
Warning - Heavy object
Identifies a possible hazard from a heavy object.
Warning - Hot surfaces
Identifies a potential hazard from a hot surface.
Warning - Maximum angle of paired slings
o MAX The maximum angle of the paired slings must not be more than 45°.
Warning - Moving parts present
Identifies parts that move. You must let the parts that turn stop before
you remove the electrical power.
Warning - Risk of explosion
There is a risk of explosion when you do the task.
Warning - Read the manual
Warning - Use protective equipment
Use appropriate protective equipment for the task.
Page 8 07/2021 - ©Edwards Limited