Parameter Description; Parameter Selection; Main Menu Structure - Danfoss VLT FC 100 Series Programming Manual

Parameter Description

3 Parameter Description

3.1 Parameter Selection

3.1.1 Main Menu Structure

Parameters for the adjustable frequency drive are grouped
into various parameter groups for easy selection of the
correct parameters for optimized operation of the
adjustable frequency drive.
®
The vast majority of VLT HVAC Drive applications can be
programmed using the Quick Menu button and selecting
the parameters under Quick Setup and Function Setups.
Descriptions and default settings of parameters may be
found under 5 Parameter Lists.
0-** Operation/Display
1-** Load/Motor
2-** Brakes
3-** Reference/Ramps
4-** Limits/ Warnings
5-** Digital In/Out
6-** Analog In/Out
8-** Comm. and Options
9-** Profibus
10-** CAN Fieldbus (Serial communication bus)
11-** LonWorks
12-** Ethernet IP / Modbus TCP / PROFINET
13-** Smart Logic Controller
14-** Special Functions
15-** FC Information
16-** Data Readouts
18-** Info & Readouts
20-** FC Closed-loop
21-** Ext. Closed-Loop
22-** Application Functions
23-** Time-based Functions
24-** Application Functions 2
25-** Cascade Controller
26-** Analog I/O Option MCB 109
®
VLT HVAC Drive Programming Guide
MG11CD22 - VLT ® is a registered Danfoss trademark
3 3
3-1