Danfoss VLT FC 100 Series Programming Manual page 187

Parameter Description
24-92 Missing Motor Coefficient 2
Range:
0.0000 [-100.0000 -
*
3 3
100.0000 ]
24-93 Missing Motor Coefficient 3
Range:
0.0000 [-100.0000 -
*
100.0000 ]
24-94 Missing Motor Coefficient 4
Range:
0.000 [-500.000 - 500.000 ] Enter the constant of the Missing
*
24-95 Locked Rotor Function
Option:
[0] Off
*
[1] Warning
24-96 Locked Rotor Coefficient 1
Range:
0.0000 [-10.0000 -
*
10.0000 ]
24-97 Locked Rotor Coefficient 2
Range:
0.0000 [-100.0000 -
*
100.0000 ]
24-98 Locked Rotor Coefficient 3
Range:
0.0000 [-100.0000 -
*
100.0000 ]
24-99 Locked Rotor Coefficient 4
Range:
0.000 [-500.000 - 500.000 ] Enter the constant of the Locked
*
3-160
VLT
Function:
Enter the quadratic coefficient of
the Missing Motor detection
function multiplied by 1,000.
Function:
Enter the linear coefficient of
the Missing Motor detection
function.
Function:
Motor detection function.
Function:
Select the action to be taken if the motor current
is above the limit calculated as a function of the
output frequency. The function is used for
detecting, e.g., a locked rotor in multi-motor
applications.
Function:
Enter the cubic coefficient of the
Locked Rotor detection function
multiplied by 1,000.
Function:
Enter the quadratic coefficient of
the Locked Rotor detection
function multiplied by 1,000.
Function:
Enter the linear coefficient of
the Locked Rotor detection
function.
Function:
Rotor detection function.
MG11CD22 - VLT
®
HVAC Drive Programming Guide
® is a registered Danfoss trademark