Main Menu - Lonworks - Group - Danfoss VLT FC 100 Series Programming Manual

Parameter Description

3.12 Main Menu - LonWorks - Group 11

Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
Range: Function:
0 [0 - 0 ] View the Neuron chip's unique Neuron ID number.
*
11-10 Drive Profile
Option: Function:
This parameter allows selecting between
LONMARK Functional Profiles.
[0] VSD profile The Danfoss Profile and the Node Object
*
are common for all profiles.
[1] Pump controller
11-15 LON Warning Word
Range: Function:
0 [0 - 65535 ] This parameter contains the LON specific
*
warnings.
Bit Status
0 Internal fault
1 Internal fault
2 Internal fault
3 Internal fault
4 Internal fault
5 Reserved
6 Reserved
7 Reserved
8 Reserved
9 Changeable types
10 Initialization error
11 Internal communication error
12 Software revision mismatch
13 Bus not active
14 Option not present
15 LON input (nvi/nci) exceeds limits
Table 3.17
11-17 XIF Revision
Range: Function:
0 [0 - 0 ] This parameter contains the version of the external
*
interface file on the Neuron C chip on the LON
option.
11-18 LonWorks Revision
Range: Function:
0 [0 - 0 ] This parameter contains the software version of the
*
application program on the Neuron C chip on the
LON option.
®
VLT HVAC Drive Programming Guide
11-21 Store Data Values
Option:
[0]
[2]
MG11CD22 - VLT ® is a registered Danfoss trademark
Function:
This parameter is used to activate storing of
data in non-volatile memory.
Off Store function is inactive.
*
Store all
Stores all parameter values in the E
setups
The value returns to Off when all parameter
values have been stored.
3 3
2 PROM.
3-77