Danfoss VLT FC 100 Series Programming Manual page 76

Parameter Description
3.7.6 5-4* Relays
Parameters for configuring the timing and the output
functions for the relays.
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1]
Option MCB 105: Relay 7 [6], Relay 8 [7] and Relay 9 [8]).
Select options to define the function of the relays.
The selection of each mechanical relay is realized in an array
parameter.
Option:
[0] No operation
*
[1] Control ready
[2] Drive ready
[3] Drive rdy/rem ctrl
[4] Standby / no warning
[5] Running
*
[6] Running / no warning
[8] Run on ref/no warn
[9] Alarm
*
[10] Alarm or warning
[11] At torque limit
[12] Out of current range
[13] Below current, low
[14] Above current, high
[15] Out of speed range
[16] Below speed, low
[17] Above speed, high
[18] Out of feedb. range
[19] Below feedback, low
[20] Above feedback, high
[21] Thermal warning
[25] Reverse
[26] Bus OK
[27] Torque limit stop
[28] Brake: No Brake War
[29] Brake ready, no fault
[30] Brake fault (IGBT)
[35] External Interlock
[36] Control word bit 11
[37] Control word bit 12
[40] Out of ref range
[41] Below reference, low
[42] Above ref, high
[45] Bus ctrl.
[46] Bus ctrl, 1 if timeout
[47] Bus ctrl, 0 if timeout
[60] Comparator 0
®
VLT HVAC Drive Programming Guide
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1]
Option MCB 105: Relay 7 [6], Relay 8 [7] and Relay 9 [8]).
Select options to define the function of the relays.
The selection of each mechanical relay is realized in an array
parameter.
Option:
[61]
[62]
[63]
[64]
Function:
[65]
[70]
[71]
[72]
[73]
[74]
Default setting for relay
[75]
2.
[80]
[81]
[82]
Default setting for relay
[83]
1.
[84]
[85]
[160]
[161]
[165]
[166]
[167]
[168]
[169]
[180]
[181]
[188]
[189]
[190]
[191]
[192]
[193]
[194]
[195]
[196]
[197]
[198]
[211]
[212]
[213]
MG11CD22 - VLT ® is a registered Danfoss trademark
Function:
Comparator 1
Comparator 2
Comparator 3
Comparator 4
Comparator 5
Logic rule 0
Logic rule 1
Logic rule 2
Logic rule 3
Logic rule 4
Logic rule 5
SL digital output A
SL digital output B
SL digital output C
SL digital output D
SL digital output E
SL digital output F
No alarm
Running reverse
Local ref active
Remote ref active
Start command act.
Hand/Off
Auto mode
Clock Fault
Prev. Maintenance
AHF Capacitor Connect
External Fan Control
No-Flow
Dry Pump
End Of Curve
Sleep Mode
Broken Belt
Bypass Valve Control
Fire Mode
Fire Mode was Act.
Drive Bypass
Cascade Pump 1
Cascade Pump 2
Cascade Pump 3
3 3
3-49