Danfoss VLT FC 100 Series Programming Manual page 40

Parameter Description
0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter
number in display. Press OK and step between elements by
▲ ▼
means of and buttons on the LCP.
Option: Function:
Specify whether each weekday is a workday or a
non-workday. First element of the array is Monday.
The workdays are used for timed actions.
[0] No
*
[1] Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter
number in display. Press OK and step between elements by
▲ ▼
means of and buttons on the LCP.
Range:
Size related [ 0 - 0 ]
*
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter
number in display. Press OK and step between elements by
▲ ▼
means of and buttons on the LCP.
Range:
Size related [ 0 - 0 ]
*
0-89 Date and Time Readout
Range: Function:
0 [0 - 0 ] Displays the current date and time. The date and
*
time is updated continuously.
The clock will not begin counting until a setting
different from default has been made in 0-70 Date
and Time.
®
VLT HVAC Drive Programming Guide
Function:
Function:
MG11CD22 - VLT ® is a registered Danfoss trademark
3 3
3-13