Parameter Description; Parameter Selection - Danfoss VLT AQUA Programming Manual

®
VLT AQUA Drive Programming Guide

2. Parameter Description

2.1. Parameter Selection

Parameters for VLT AQUA Drive FC 202 are grouped into various parameter groups for easy se-
lection of the correct parameters for optimized operation of the frequency converter.
The vast majority of water/ wastewater applications can be programmed using the Quick Menu
button and selecting the parameters under Quick Setup and Function Setups.
Descriptions and default settings of parameters may be found under the section Parameter Lists
at the back of this manual.
0-xx Operation/Display
1-xx Load/Motor
2-xx Brakes
3-xx Reference/Ramps
4-xx Limits/ Warnings
5-xx Digital In/Out
6-xx Analog In/Out
8-xx Comm. and Options
9-xx Profibus
10-xx DeviceNet Fieldbus
11-xx LonWorks
®
MG.20.O2.02 - VLT is a registered Danfoss trademark
2. Parameter Description
13-xx Smart Logic
14-xx Special Functions
15-xx Drive Information
16-xx Data Readouts
18-xx Info & Readouts
20-xx Drive Closed Loop
21-xx Ext. Closed Loop
22-xx Application Functions
23-xx Time-based functions
25-xx Basic Cascade Controller
26-xx Analog I/O Option MCB 109
27-xx Extended Cascade Controller
29-xx Water Application Functions
31-xx Bypass Option
2
25