Danfoss VLT FC 100 Series Programming Manual page 98

Parameter Description
9-71 Profibus Save Data Values
Option: Function:
Parameter values changed via Profibus are not
automatically stored in non-volatile memory.
Use this parameter to activate a function that
stores parameter values in the EEPROM non-
volatile memory, so changed parameter values
will be retained at power-down.
[0] Off Deactivates the non-volatile storage function.
*
[1] Store edit Stores all parameter values for all set-ups in the
setup non-volatile memory. The selection returns to
Off [0] when all parameter values have been
stored.
[2] Store all Stores all parameter values for all set-ups in the
setups non-volatile memory. The selection returns to
Off [0] when all parameter values have been
stored.
9-72 ProfibusDriveReset
Option: Function:
[0] No action
*
[1] Power-on Resets Adjustable frequency drive upon
reset power-up, as for power-cycle.
[3] Comm Resets the Profibus option only, useful after
option reset changing certain settings in parameter
group 9-**, e.g., 9-18 Node Address.
When reset, the Adjustable frequency drive
disappears from the serial communication
bus, which may cause a communication
error from the master.
9-80 Defined Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the defined
*
Adjustable frequency drive parameters available
for Profibus.
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the defined
*
Adjustable frequency drive parameters available
for Profibus.
®
VLT HVAC Drive Programming Guide
9-82 Defined Parameters (3)
Array [116]
No LCP access
Read only
Range:
0
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
Range:
0
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range:
0
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range:
0
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range:
0
MG11CD22 - VLT ® is a registered Danfoss trademark
Function:
[0 - 9999 ] This parameter displays a list of all the defined
*
Adjustable frequency drive parameters available
for Profibus.
Function:
[0 - 9999 ] This parameter displays a list of all the defined
*
Adjustable frequency drive parameters available
for Profibus.
Function:
[0 - 9999 ] This parameter displays a list of all the
*
Adjustable frequency drive parameters
deviating from default setting.
Function:
[0 - 9999 ] This parameter displays a list of all the
*
Adjustable frequency drive parameters
deviating from default setting.
Function:
[0 - 9999 ] This parameter displays a list of all the
*
Adjustable frequency drive parameters
deviating from default setting.
3 3
3-71