Danfoss VLT FC 100 Series Programming Manual page 127

Parameter Description
3.15.4 15-3* Alarm Log
Parameters in this group are array parameters, where up to
10 fault logs can be viewed. [0] is the most recent logged
3 3
data, and [9] the oldest. Error codes, values and time
stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Array [10]
Range:
0 [0 - 255 ] View the error code and look up its meaning in
*
15-31 Alarm Log: Value
Array [10]
Range:
0 [-32767 - 32767 ] View an extra description of the error.
*
15-32 Alarm Log: Time
Array [10]
Range:
0 s [0 - 2147483647 s] View the time when the logged event
*
15-33 Alarm Log: Date and Time
Range:
Size related
*
3.15.5 15-4* Drive Identification
Parameters containing read-only information about the
hardware and software configuration of the Adjustable
frequency drive.
15-40 FC Type
Range:
0 [0 - 0 ] View the FC type. The readout is identical to the
*
3-100
Function:
4 Troubleshooting.
Function:
This parameter is mostly used in
combination with alarm 38 'internal
fault'.
Function:
occurred. Time is measured in seconds
from Adjustable frequency drive start-
up.
Function:
[ 0 - 0 ] Array parameter; Date & Time 0 - 9: This
parameter shows at which time the
logged event occurred.
Function:
adjustable frequency drive series power field of the
type code definition, characters 1-6.
MG11CD22 - VLT
®
VLT HVAC Drive Programming Guide
15-41 Power Section
Range:
0 [0 - 0 ] View the FC type. The readout is identical to the
*
15-42 Voltage
Range:
0 [0 - 0 ] View the FC type. The readout is identical to the
*
15-43 Software Version
Range:
0 [0 - 0 ] View the combined SW version (or 'package
*
15-44 Ordered Typecode String
Range:
0 [0 - 0 ] View the type code string used for re-ordering the
*
15-45 Actual Typecode String
Range:
0
*
15-46 Adj Freq Dr Ordering No.
Range:
0 [0 - 0 ] View the 8-digit ordering number used for re-
*
15-47 Power Card Ordering No.
Range:
0 [0 - 0 ]
*
15-48 LCP ID Num.
Range:
0
*
15-49 SW ID Control Card
Range:
0 [0 - 0 ]
*
15-50 SW ID Power Card
Range:
0 [0 - 0 ]
*
® is a registered Danfoss trademark
Function:
adjustable frequency drive series power field of the
type code definition, characters 7-10.
Function:
adjustable frequency drive series power field of the
type code definition, characters 11-12.
Function:
version') consisting of power SW and control SW.
Function:
Adjustable frequency drive in its original configu-
ration.
Function:
[0 - 0 ] View the actual string.
Function:
ordering the Adjustable frequency drive in its
original configuration.
Function:
View the power card ordering number.
Function:
[0 - 0 ] View the LCP ID number.
Function:
View the control card software version number.
Function:
View the power card software version number.