Danfoss VLT FC 100 Series Programming Manual page 112

Parameter Description
13-40 Logic Rule Boolean 1
Array [6]
Option: Function:
[44] Reset Key This logic rule is TRUE if the reset key
on the LCP is pressed.
[45] Left Key This logic rule is TRUE if the left key
on the LCP is pressed.
[46] Right Key This logic rule is TRUE if the right key
on the LCP is pressed.
[47] Up Key This logic rule is TRUE if the up key
on the LCP is pressed.
[48] Down Key This logic rule is TRUE if the down
key on the LCP is pressed.
[50] Comparator 4 Use the result of comparator 4 in the
logic rule.
[51] Comparator 5 Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5 Use the result of logic rule 5 in the
logic rule.
[70] SL Timeout 3 Use the result of timer 3 in the logic
rule.
[71] SL Timeout 4 Use the result of timer 4 in the logic
rule.
[72] SL Timeout 5 Use the result of timer 5 in the logic
rule.
[73] SL Timeout 6 Use the result of timer 6 in the logic
rule.
[74] SL Timeout 7 Use the result of timer 7 in the logic
rule.
[76] Digital Input x30 2
[77] Digital Input x30 3
[78] Digital Input x30 4
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
[90] ECB Drive Mode
[91] ECB Bypass Mode
[92] ECB Test Mode
[100] Fire Mode
®
VLT HVAC Drive Programming Guide
13-41 Logic Rule Operator 1
Array [6]
Option:
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
13-42 Logic Rule Boolean 2
Array [6]
Option:
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
MG11CD22 - VLT ® is a registered Danfoss trademark
Function:
Select the first logical operator to use on
the Boolean inputs from 13-40 Logic Rule
Boolean 1 and 13-42 Logic Rule Boolean 2.
[13-**] signifies the Boolean input of
parameter group 13-**.
DISABLED Ignores 13-42 Logic Rule Boolean 2,
*
13-43 Logic Rule Operator 2, and 13-44 Logic
Rule Boolean 3.
AND Evaluates the expression [13-40] AND
[13-42].
OR evaluates the expression [13-40] OR [13-42].
AND NOT evaluates the expression [13-40] AND NOT
[13-42].
OR NOT evaluates the expression [13-40] OR NOT
[13-42].
NOT AND evaluates the expression NOT [13-40] AND
[13-42].
NOT OR evaluates the expression NOT [13-40] OR
[13-42].
NOT AND NOT evaluates the expression NOT [13-40] AND
NOT [13-42].
NOT OR NOT evaluates the expression NOT [13-40] OR
NOT [13-42].
Function:
Select the second Boolean (TRUE or
FALSE) input for the selected logic
rule.
See 13-40 Logic Rule Boolean 1 for
further descriptions of choices and
their functions.
FALSE
*
TRUE
Running
In range
On reference
Torque limit
Current limit
Out of current range
Below I low
Above I high
Out of speed range
Below speed low
Above speed high
3 3
3-85