Parameter Description; Parameter Selection; Main Menu Structure - Danfoss VLT Programming Manual

Parameter Description

3 Parameter Description

3.1 Parameter Selection

3.1.1 Main Menu Structure

Parameters for the frequency converter are grouped into
various parameter groups for easy selection of the correct
parameters for optimized operation of the frequency
converter.
The vast majority of VLT HVAC Drive applications can be
programmed using the Quick Menu button and selecting the
parameters under Quick Setup and Function Setups.
Descriptions and default settings of parameters may be
found under the section Parameter Lists at the back of this
manual.
0-** Operation/Display
1-** Load/Motor
2-** Brakes
3-** Reference/Ramps
4-** Limits/ Warnings
5-** Digital In/Out
6-** Analog In/Out
8-** Comm. and Options
9-** Profibus
10-** CAN Fieldbus
11-** LonWorks
13-** Smart Logic Controller
14-** Special Functions
15-** FC Information
16-** Data Readouts
18-** Info & Readouts
20-** FC Closed Loop
21-** Ext. Closed Loop
22-** Application Functions
23-** Time Based Functions
24-** Application Functions 2
25-** Cascade Controller
26-** Analog I/O Option MCB 109
®
VLT HVAC Drive Programming Guide
®
MG.11.CB.02 - VLT is a registered Danfoss trademark
3 3
25