Danfoss VLT FC 100 Series Programming Manual page 170

Parameter Description
Please also see 22-82 Work Point Calculation point A.
22-89 Flow at Design Point
Range:
0.000 [0.000 -
*
999999.999 ]
Please also see 22-82 Work Point Calculation point C.
22-90 Flow at Rated Speed
Range:
0.000 [0.000 - Enter the value corresponding to
*
999999.999 ] Flow at Rated Speed. This value
can be defined using the pump
datasheet.
®
VLT HVAC Drive Programming Guide
Function:
Enter the value corresponding to
the Flow at Design Point. No
units necessary.
Function:
MG11CD22 - VLT ® is a registered Danfoss trademark
3 3
3-143