Holidays - Mircom TX3 Series Installation And Operation Manual

Each schedule has an ID and a label to identify the schedule for use in the
configurator software.
If the current time and day satisfies any one of the eight periods in a schedule, the
schedule is considered to be active; otherwise, it is inactive.
By default the following two schedules cannot be edited:
•
•
Schedules are used for the following:
•
•
•
•
•
For more information on Schedules, see LT-995.
3.12

Holidays

Up to 128 holidays can be entered in the system. Each holiday consists of the
following:
•
•
If a holiday falls on the same date each year it can be programmed as an annual
event.
Each holiday has a holiday ID and label to identify the holiday for use in the
configurator software.
By default, New Year (January 1) is already programmed into the system.
For more information on managing holidays, see LT-995.
TX3 Aperio Door Controller System Installation and Operation Manual
v. 1.6
LT-1160 Copyright 2019
'Always' schedule
'Never' schedule
Timer schedule
Correlations
Auto-unlock
PIN required schedule
Access levels
start time/date
end time/date
Configuration
97