Holidays; System Status; Common Trouble - Mircom TX3 Series Installation And Operation Manual

Each schedule has an ID and a label to identify the schedule for use in the
configurator software.
If the current time and data satisfies any one of the four periods in a schedule the
schedule is considered to be active, otherwise it is inactive.
By default the following two schedules cannot be edited:
•
•
Schedules are used for the following:
•
•
•
•
•
3.6

Holidays

Holidays are actually part of the schedule, up to a maximum of 128 holidays.
Each holiday consists of the following:
•
•
If a holiday falls on the same date each year it can also be programmed as an
annual event.
Each holiday has a holiday ID and label to identify the holiday for use in the
configurator software.
By default only the new year is programmed into the system.
3.7

System Status

The controller monitors inputs for trouble and alarm conditions.
3.7.1

Common trouble

The common trouble indicator is active when any of the following inputs receive
a trouble condition:
TX3-CX Card Access System Installation and Operation Manual
46 (56)
Copyright 2009
'Always' schedule
'Never' schedule
Timer schedule
Correlations
Auto-unlock
PIN required schedule
Access levels
start time/date
end time/date
Configurable Features
Version 1.00.3