Common Alarm - Mircom TX3 Series Installation And Operation Manual

•
•
•
•
•
The common trouble status clears only if all the above inputs or statuses are back
in their normal states. When the common trouble status is active, the common
trouble LED flashes at a slow rate.
3.14.2

Common Alarm

The common alarm status is active when any of the following inputs receive an
alarm condition:
•
•
•
The common alarm status clears only if all the above inputs and statuses are back
in their normal states. When the common alarm status is active, the common
alarm LED flashes at a fast rate.
TX3 Aperio Door Controller System Installation and Operation Manual
100
LT-1160 Copyright 2019
Door held open warning
Battery low or flat
Lockset offline
Hub offlline
Lock jammed
forced entry alarm
door held open alarm
tamper alarm (from the device)
Configuration
v. 1.6