Schedules - Mircom TX3 Series Installation And Operation Manual

5.
6.
7.
Continue with your configuration settings. After you have completed all of your
configuration settings, connect to your TX3 system and send the job (see section
3.13, Sending Your Configuration, on page 98).
3.11

Schedules

Schedules let you set up a timetable to establish when certain actions are
permitted to occur, such as door access. These schedules are designated and
listed by name in the configurator software, and are available for selection
wherever it is necessary to invoke access permission.
The system can store up to 64 schedules. Each schedule consists of eight periods
with each period consisting of
•
•
TX3 Aperio Door Controller System Installation and Operation Manual
96
LT-1160 Copyright 2019
Select the Profile tab, and then enter the following information:
First name. First name of the card holder.
Last name. Last name of the card holder.
Phone. The phone number of the card holder.
Mobile Phone. The mobile phone number of the card holder.
E-mail. The e-mail address of the card holder.
Department. The business department of the card holder.
Profile ID. Reserved for future use.
Select Profile. Reserved for future use.
Select the More profile Info tab, and then enter the following card holder
information:
Address.
Apt#.
City.
Province/State.
Country/Region.
Postal/zip code.
Click OK.
Start time and end time in hours: minutes format
Days of the week and Holiday selection
Configuration
v. 1.6