Mircom TX3 Series Installation And Operation Manual page 39

This section covers the basic procedure for pairing a wireless device with an
Aperio hub. The first step is to create a new installation database for your site
using the site's Encryption Key file. The second step is to scan for the Aperio
hubs in your installation and then pair each device to a hub.
To pair a device with an Aperio hub, you need the following:
•
•
•
•
If you do not have all of these items, contact Mircom Technical Support. See
Contact Us on page 16 for the contact information.
To create a new installation database
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The next time you start the Aperio Programming Application, the new
installation will appear in the list of installations. The installation database
contains the information stored in the Encryption Key file and is used to establish
a secure radio communication link between the wireless devices and the Aperio
hubs. At this point the Encryption Key file is no longer needed and should be
deleted.
TX3 Aperio Door Controller System Installation and Operation Manual
v. 1.6
LT-1160 Copyright 2019
A Tritech TriBEE USB Radio dongle.
A computer with the drivers for the Tritech TriBEE USB Radio dongle
and the Aperio Programming Application installed.
The Encryption Key file for your installation.
At least one access card.
Insert the Tritech TriBEE USB Radio dongle in your computer, and then
start the Aperio Programming Application.
If you are prompted to select an installation or to enter an installation
name, click Cancel.
Click File > New.
In the Installation name text box, enter the name for your
installation.
Click the Select key file button (
In the Select key file window, browse to the location of the
Encryption Key file for your installation, select it, and then click Open.
Click Create new.
In the Enter Password window, enter a valid password for the
installation database, confirm the password, and then click OK.
Click Cancel to close the communication hub selection window.
Close the Aperio Programming Application.
Installation and Setup
) in the Key file area.
39