24
Operation of basic unit via the AZL2...
24.1 Normal display
Normal display is the standard display in normal operation, representing the highest menu level. From the
normal display, you can change to the info, service or parameter level.
24.1.1 Display in standby mode
P
24.1.2 Display during startup / shutdown
24.1.2.1. Display of program phases
P
24.1.2.2. Display of program phase with remaining running time until end of the phase is reached
P
164/248
Building Technologies Division
Infrastructure & Citiies Sector
Unit is in standby mode.
Note
OFF flashes when the Manual OFF function, the
V
h min s
%
output, or controller OFF is activated.
The unit is in phase 22. The controller calls for heat. The
bar below the
phases and controlled components are displayed in
accordance with the program sequence.
V
h min s
%
The unit is in phase 30 and shows the remaining running
time in that phase.
Example: 12 s, phase 30
V
h min s
%
Basic documentation LMV36...
24 Operation of basic unit via the AZL2...
symbol appears. The individual program
manual
CC1P7544en
25.09.2013