Service Level; Display Of Service Level - Siemens LMV36.520A1 Basic Documentation

27

Service level

The service level is used to display information about errors including the error history and information about
the basic unit.

Note
When on the service level, you can press
parameter.
Instead of pressing

Note
Press

Note
P
Parameter
Figure 97: Service level
No change of values on the service level.
If characters
Press
Press

27.1 Display of service level

P
/reset
Building Technologies Division
Infrastructure & Citiies Sector
, you can also press
ESC
or for >3 s to return to the normal display.
/reset
V h min s %
Parameter value
are displayed by the parameter, the value may consist of more than 5 digits.
for >1 s and <3 s to display the value.
/reset
ESC
for >3 s or to return to the selection of the parameter (flashing).
/reset
V h min s %
No. Parameter
Service level
954 Intensity of flame
960 Actual flow rate (fuel throughput in m³/h, l/h, ft³/h, gal/h)
945 Actual fuel
0 = fuel 0
1 = fuel 1
121 Manual output
Undefined = automatic operation
922 Incremental position of actuators
Index 0 = fuel
Index 1 = air
936 Standardized speed
161 Number of faults
701 Error history: 701-725.01.Code
Basic documentation LMV36...
27 Service level
or to display the next or the previous
for <1 s.
/reset
Press for >3 s until SEr appears.
/reset
When releasing , you are on the service level.
/reset
175/248
CC1P7544en
25.09.2013