Fuel-Air Ratio Curves - Settings And Commissioning; Initial Commissioning - Siemens LMV36.520A1 Basic Documentation

28.11 Fuel-air ratio curves – settings and commissioning
P

28.11.1 Initial commissioning

P
For initial commissioning, change to the parameter level (refer to chapter Operation).
The settings can then be made on parameter level 400.
P
/reset
P
/reset
Building Technologies Division
Infrastructure & Citiies Sector
V h min s %
V h min s %
V h min s %
V h min s %
Basic documentation LMV36...
28 Parameter level
The display shows 400: flashing on the left,
SEt appears on the right.
An unprogrammed unit or a unit whose operating
mode has been reset or changed displays OFF UPr0
or OFF UPr1.
Press to select parameter 400 for initial
/reset
commissioning and for setting fuel-air ratio control.
Press to go to the settings for fuel-air ratio control
/reset
and parameter 201 for selecting the operating mode.
201: appears flashing.
193/248
CC1P7544en
25.09.2013