Siemens LMV36.520A1 Basic Documentation page 230

Par. Parameter
no. LMV36...
Bit 4 = 16: Fuel valve 2
Bit 5 = 32: Fuel valve 3 / pilot valve
951 Mains voltage (normalized)
AC 230 V: Voltage = value x 1.683
AC 120 V: Voltage = value x 0.843
954 Intensity of flame
960 Actual flow rate (m³/h, l/h, ft³/h, gal/h)
961 Phase (state for external module and display)
981 Error memory: Code
982 Error memory: Diagnostic code
992 Error flags
Legend
Std_u8 8 bit integer, not signed
Std_u16 16 bit integer, not signed
Std_u32 32 bit integer, not signed
Std_s8 8 bit integer, signed

Note
This data type is also used to mark an invalid or non-signed value by using the value of -1 !
Std_s16 16 Bit integer, signed

Note
This data type is also used to mark an invalid or non-signed value by using the value of -1 !
Std_s32 32 Bit integer, signed

Note
This data type is also used to mark an invalid or non-signed value by using the value of -1 !
230/248
Building Technologies Division
Infrastructure & Citiies Sector
Number of Type Edit
elements
1 Std_u8 Read only
1 Std_u8 Read only
1 Std_u16 Read only
1 Std_u8 Read only
1 Std_u8 Read only
1 Std_u8 Read only
10 Hex_32 Reset
Basic documentation LMV36...
29 Parameter list LMV36...
Value range Resolution
Min Max
0 V 255 V 1 V
0% 100% 1%
0 6553.5 0.1
0 255 1
0 255 1
0 255 1
0 0xFFFFFFFF 1
Default Password level
setting
0 V SO
0% Info / Service
0 Info / Service
0 Info / Service
0 Info / Service
0 Info / Service
0 SO
CC1P7544en
25.09.2013