Backup / Restore - Siemens LMV36.520A1 Basic Documentation

23.6

Backup / restore

Building Technologies Division
Infrastructure & Citiies Sector
Using the AZL2, the settings made on the basic unit can be stored (backup) and then
transferred back to the basic unit at a later point in time.
Creating a backup data set
No. Parameter
050.0 Index 0: Creation of backup
The following parameters can be used to read information about the backup data set:
No. Parameter
055 Burner identification of the AZL2 backup data set
056 ASN extraction of the AZL2 backup data set
057 Software version used when creating the AZL2 backup data set
Restoring a backup data set
To transfer a backup data set back to the basic unit, the parameter must be set to 1.
No. Parameter
050.1 Index 1: Execute restore
Basic documentation LMV36...
23 Operating the AZL2... unit
159/248
CC1P7544en
25.09.2013